Car Ghost Immobiliser
Ghost Immobiliser is a sophisticated system that blocks your car from starting if it does not have an individual pin code sequence, inputted via buttons already in use (such as the ones on the dashboard or on the steering wheel). The device is unnoticeable to thieves and runs quietly.
It can be helpful in preventing hotwiring, as well as newer methods like relay thefts. You could also see an improvement in your insurance cost.
No Radio Frequencies
A ghost immobiliser is different from a standard one in that it doesn't transmit radio frequency, making it impossible for thieves to bypass the device by using a low-cost cloning tool. Ghost immobilisers stop your car from starting even in the event that a thief has copied or stolen your key.
Ghost immobilisers are also effective against so-called relay attacks. The signal from your keyfob is amplified to trick the system into allowing your car to begin. The Ghost will be able to detect this and refuse to start your car, and will require you to enter your PIN code. This is a great way to combat tech-savvy car thieves who have easy-to-use and affordable tools to duplicate your vehicle.
The Ghost can also be installed discreetly (without doing any damage to your vehicle) and will only work once the correct pin sequence has been entered. The Ghost is only accessible to the owner, and no one else is able to use your vehicle unless they have your pin code. Some systems allow owners to set up valet or service mode, which allows them to temporarily let someone else drive the vehicle without divulging their pin code, protecting them from opportunistic thieves.
The Ghost is not just simple to use and fast to disarm but can also be linked to a car tracker so that you can locate your vehicle. Some insurers offer discounts on car insurance for vehicles equipped with Ghosts. This is a great benefit because it improves the security of your vehicle.
The Ghost immobiliser, though not Thatcham approved, is an aftermarket product that has been independently evaluated and confirmed to work. If you're thinking about purchasing a used vehicle that comes with the Ghost immobiliser fitted, then inquire with the seller if they are willing to transfer it to the vehicle you are buying. This will make your new car more secure than in the event that the previous owner had not transferred it.
No Circuit Cuts
The absence of circuit cuts means that in the event that your car is stolen, thieves won't be able to get it started. The thieves will need to be aware of the buttons used to unlock the vehicle, and they will not be able to accomplish this without knowing the sequences. This will discourage them and ensure that they don't attempt the theft in the first place since they may not be able to drive away with the vehicle.
If you have a GPS tracking device installed and you are using the Ghost can act as an anti theft device. It can send a signal that will trigger a siren alarm to notify the tracker of a theft attempt. This feature can be turned off at any time through your online dashboard.
When you link your Ghost to your CAN data network, it will identify the vehicle and its owner through the unique pin code programmed during installation. This allows the device to communicate with your vehicle's ECU and to stop the engine. This means that the engine will only be started when it is authorised by the vehicle owner or someone with a valid PIN code.
The pin code is impossible to decipher for potential thieves since it's made with buttons that can be easily accessed by the driver, such as stereo mute and cruise control. Your engineer will give you a Pin Code Override Card that is similar to a lottery scratch-off ticket. It just requires scratching to reveal the code.
Unlike traditional immobilisers which can often be discovered by thieves using diagnostics to read the immobiliser relay, your Ghost is undetectable by these methods as it doesn't utilize radio frequencies or circuit cuts. This means it is not affected by the modern methods used by organised gangs of thieves who specialise in RF scanning and code-grabbing technology. It is a product that lasts for a lifetime that is able to be removed from your vehicle once you sell it. This means that you won't lose any of the security you've invested in.
No Key Fobs
With increasing theft of vehicles in the UK It is imperative to take proactive measures required to protect precious vehicles from thieves who are opportunistic. The Autowatch Ghost Immobiliser is an innovative device that provides an effective defense against key hacking, cloning and attacks on signals relay. It's a subtle and highly effective car safety system that is simple for anyone to install.
The Ghost immobiliser is not an ordinary system that relies on key fobs. It also doesn't utilize signals relays. It is not affected by signal interference and cannot be activated using stolen or damaged remotes. It is also tamper proof and has no external wiring, which makes it difficult to remove or disable.
It shields your pride and joy from hacking, key-longs and key theft by preventing the engine from starting until you input a unique PIN code. This is accomplished by using buttons already present on the vehicle, for example those on the steering wheel and doors.
ghost immobiliser cost works only if you enter the correct pin code. This makes it very difficult for thieves to steal your vehicle, and is simple to use. If you're concerned about not remembering your pin code or forgetting your pin code, you can ask the installer to provide you with a driver's license that lets you drive the car as normal.
The Ghost immobiliser isn't detected by diagnostic equipment, like RF scanners, or other tools used by thieves. This installation that is stealthy enhances its effectiveness and allows the system to be installed in a position that is difficult for thieves to access.
Ghost immobilisers are a low-cost and highly effective deterrent to theft and improve the resale value of your car. They are also recognised by a few insurance companies and can result in lower rates.
No Damage
If your vehicle is equipped with a ghost immobiliser, you can rest your mind in knowing that your vehicle is protected against cloning, hacking, key-fob theft and other common methods of theft. This is especially important if you've invested a lot of time and money the customization of your vehicle or own an expensive or unique model. Ghost immobilisers are silent and require no additional components or installation.
The system is activated by buttons on your steering wheel, center console, or door panels and enables you to set up an encrypted pin code sequence that must be entered before the engine can start. The sequence can be modified by you at any time, ensuring that even if a thief knows your pin number it is not possible for them to start your car. It is also simple to disable the device when it is in a service valet mode so that your vehicle can be removed for servicing, cleaning or an MOT without it being activated.
This means that even if your vehicle is cloned or stolen, the criminal won't be in a position to start your car and be caught in the act. The system will also notify you of any tampering with your vehicle's wiring system for example, cutting or signal interference, and can send this information to your phone and allow you to check that your car's security is in place at all times.
However, there could be a point at which you want to remove or disable the Ghost Immobiliser, perhaps to maintain it or sell it. In this scenario, you will have to be very careful to not cause damage to the wiring in your vehicle. Wearing safety gloves and flashlights is recommended during this process. It is also worth referring to any installation documentation or user manuals that you might have available to determine the exact location of the device.
Once the immobiliser has been disconnected from your vehicle's wiring system, you can reconnect the car battery and test to make sure that it is working properly and that all electrical components are functioning as intended. You will need to use soldering or electrical tape to insulate any wires that have been cut. Be sure that there aren't any wires exposed and that any dangling cables are secured using zip ties or other suitable method. Then, schedule a inspection with a professional to make sure that the removal process didn't damage any other systems in your car.